Belleville Rubber Resurfacing
Belleville, Ontario ยท On the Bay of Quinte
Belleville Rubber Resurfacing provides pool deck resurfacing, driveway and garage floor resurfacing, playground safety surfacing and patio resurfacing to the Belleville area. Our team is fully insured and capable of any job. Every quote is measured on site and given to you in writing before any work starts.
Call +1 343-301-0692.
Tell us what surface needs resurfacing and roughly how big it is. We visit, measure it, and put a specification in your hands. Or call +1 343-301-0692.
Belleville has old concrete around the harbour and newer concrete out toward Corbyville and Foxboro, and the two need different amounts of preparation before rubber goes on. We measure the slab, check it for movement and moisture, and write a scope that says exactly what product, what thickness and what area is being installed before a truck shows up. Read more about how we work on our about page.
Every job we take on is fully insured. We do not sell a rate over the phone. A price gets set after somebody has actually looked at the surface, because a pool deck with a hairline crack and a pool deck with a settled corner are not the same job, even at the same size.
Six services, one for each kind of surface. Tell us which one fits and we will take it from there.
Belleville Rubber Resurfacing provides rubber resurfacing for pool decks, replacing cracked and slippery concrete without breaking it out. The rubber bonds directly to the slab that is already there, cures within a day or two, and comes back with slip resistance built into the surface instead of added on top of it afterward. Every job we take on is fully insured.
View Pool Deck Resurfacing
Belleville Rubber Resurfacing provides rubber resurfacing for driveways and garage floors that have cracked, pitted or spalled, without ripping out the concrete underneath. Black recycled rubber is the standard choice here, because it takes vehicle and foot traffic well and stands up to salt, oil and de-icer through a full Belleville winter. All of our work is fully insured.
View Driveway and Garage Floor Resurfacing
Belleville Rubber Resurfacing pours safety surfacing under play structures for schools, daycares, municipalities and backyards, built to cushion a fall rather than just look soft. The base layer and the coloured wear layer go down together as one bonded surface, with no loose fill to kick around or top up every season. Our team is fully insured and capable of any job, from a single backyard swing set to a full school playground.
View Playground Safety Surfacing
Belleville Rubber Resurfacing resurfaces patios, walkways and outdoor steps in poured rubber, over existing concrete, interlock or stamped concrete. The surface goes down textured and slip-resistant from the start, in a colour chosen to match the house or the landscaping around it. Every quote is measured on site and given to you in writing before any work starts.
View Patios, Walkways and Steps
Belleville Rubber Resurfacing pours seamless rubber flooring for home gyms, basement weight rooms and small fitness studios, built to take a dropped barbell without cracking or shifting. The surface goes down as one continuous layer rather than interlocking tiles, so there are no seams to lift, gap or curl at the edges. Insurance covers all of the work we do.
View Gym and Fitness Flooring
Belleville Rubber Resurfacing provides rubber resurfacing for commercial entryways, municipal facilities, riding arenas and horse barns, sized and specified for the traffic each one actually carries. A retail entrance, a splash pad and a barn aisle each call for a different thickness and finish, and we scope the job to the building rather than pouring one specification everywhere. Every job we take on is fully insured.
View Commercial and Equestrian SurfacingRubber resurfacing goes on top of an existing slab, so a cracked pool deck or a chipped garage floor does not need to be broken out and replaced.
The finished surface is soft underfoot and keeps its grip far better than bare concrete, especially right at a pool edge.
The material is elastic, so it flexes with small movement in the concrete below instead of cracking the way a rigid coating does.
Poured rubber resurfacing comes in dozens of colours, so a playground, a patio or a commercial floor can be laid out in a pattern rather than one flat shade.
Most jobs are back in use within a day or two of the pour, not the week or more that full concrete replacement takes.
Recycled rubber makes up most of the material, so rubber resurfacing keeps old tires out of landfill instead of quarrying new aggregate.
A written scope naming the product, the thickness and the area covered comes with every quote, so there is no guessing at what was actually installed.
A short visit tells us more than any amount of describing it can. Neither the visit nor the specification that follows costs you anything.
Belleville's winters swing back and forth across freezing all season instead of staying reliably cold, and every one of those swings pushes water further into a hairline crack in an old pool deck. Rubber resurfacing seals over that surface and flexes with small movement instead of failing the way a rigid coating does.
Wet, bare concrete and smooth interlock both lose most of their grip the moment they get wet, and a pool deck is wet more often than it is dry. Rubber resurfacing keeps a consistent texture whether it is dry, splashed or freshly hosed down, which matters most right at the pool edge, where most slips happen.
Salt and slush dripping off a vehicle all winter get into the surface of bare concrete and cause it to flake and pit, a problem known locally as spalling. Rubber resurfacing seals over that surface, so the salt and slush sit on top of the rubber instead of soaking into the concrete underneath.
Play equipment gets built at a range of heights, and the ground underneath it needs to absorb a fall from that height, not just look soft. We pour the base layer and the wear layer to the thickness the equipment on site calls for, and we can tell a school, daycare or municipality exactly what was installed and how thick it is.
Belleville has plenty of older interlock patios and stamped concrete driveways downtown and around the historic core, and both wear smooth and grow slippery within a few years. Rubber resurfacing goes directly over top without lifting a single paver, and it comes back with grip built into the surface rather than sanded or sealed on afterward.
A concrete or plywood subfloor under a home gym can crack or dent under a dropped barbell, and standard interlocking foam tiles shift and gap over time. Poured rubber flooring is seamless, so there is nowhere for a tile edge to lift, and it absorbs impact instead of passing it straight into the floor joists below.
Belleville and the country around Stirling-Rawdon carry a fair amount of horse property, and a barn aisle poured in plain concrete gets slick with mud, hay dust and manure. Rubber resurfacing keeps its grip wet or dry and drains through the surface rather than pooling, which matters as much for the horses as for whoever is leading them.
The biggest difference between rubber resurfacing and replacement is what happens to the old surface. Nobody breaks out the existing concrete, hauls it away and pours new. The rubber bonds directly onto the slab that is already there, which is most of the reason the job finishes in days instead of weeks.
A rubber surface is only as good as what it is bonded to. A slab that is still moving, still holding water underneath, or coated in old sealer will not hold a new surface no matter how carefully it goes on. We check for all three before we quote a job, and we say so when a slab needs repair first instead of rubber resurfacing over a problem.
Two materials make up most of the rubber resurfacing we install. Black recycled rubber is the lower-cost option and the standard choice for driveways, garages and barn aisles. Coloured rubber holds its colour longer in direct sun and is the standard choice for pool decks, playgrounds and patios, where appearance matters more.
We come out, measure the area and check the slab for cracks, movement and drainage.
We agree on a colour and a finish, and put the product, thickness and price in writing.
The surface is cleaned, patched where it needs it, and primed so the rubber bonds properly.
The rubber and binder are mixed and hand-troweled to the specified thickness in one pass.
The surface cures for 24 to 48 hours before it goes back into use.
Pool decks, driveways, playgrounds and barns from around Belleville and the Bay of Quinte.
Belleville sits at the mouth of the Moira River on the Bay of Quinte, and most of the rubber resurfacing work here follows the water: pool decks and waterfront patios around the bay, driveways and garage floors through the older neighbourhoods near downtown, and barns and commercial buildings out toward Stirling-Rawdon and Thurlow. Trenton, the largest community in neighbouring Quinte West, is a short drive west along Highway 2, and Napanee sits about the same distance east.
We also take on work in Prince Edward County across the bay. Wherever the job is, the visit and the written quote cost nothing. See our services page for the full list of what we install, or contact us to book a visit.
Use the form or dial +1 343-301-0692. The surface gets measured, the product and thickness get matched to the job, and one price goes on paper.
No flat rate gets published here, because a rate by itself does not tell you what your job actually needs. Price is set by the area, the condition of the existing surface, and how much preparation it needs before the rubber goes on. We measure the site and put a fixed figure in writing, and the visit and the quotation are both free.
In most cases, yes, provided the crack is not still actively moving. The rubber surface flexes with small movement in the slab below instead of cracking the way a rigid coating does. A crack that keeps growing points to a problem underneath the slab, and that has to be dealt with before rubber resurfacing goes on, not covered by it.
Life depends heavily on preparation and the material used. A properly prepared surface using coloured rubber is built to hold up for years of pool-side use and Belleville winters, and we will tell you what to expect for your specific job at the visit rather than quoting one number for every surface.
Yes. The rubber bonds directly to interlock, stamped concrete or plain concrete without lifting a single paver or stone. What matters is whether the surface underneath is sound, not what it is made of.
Most jobs are back in use within 24 to 48 hours of the pour, once the surface has cured. Larger or thicker installations can take a little longer, and we will give you the exact number before work starts.
Detail about the surface makes the first visit worth far more. Strictly speaking, a phone number is the only thing required. Would rather just call? The number is +1 343-301-0692.
